Forumsee logo
Forumsee » Motorbikes

Messages labeled as 'Aprilia'

1 2 3 4 5 6 7 Next >>   25 50 75

2 days ago

When i came back home with my "last Tuono" i noticed i had my handlebar slight bent. Tried to restore with no luck. Therefore i replaced with Accossato model no. HB 173 that ha...

3 days ago

Can anybody hell me out? I need to see what the emissions sticker and the federal safety sticker looks like. Can anybody with a 2008 or newer take a pic of theirs for me? Id r...

4 days ago

hi there long time lurker but this is my first post . my o6 aa500 doesnt start from the button. but if i cross the solenoid terminals it starts fine but it only runs a sh...
I had bought a 2016 and one of the biggest problems I had was the poor performing QS. How is the 2017? How does it work in various gears and revs? Im thinking about revisitin...

5 days ago

Hello all, new owner of a 2007.5 Tuono. The bike came well equipped with most of the minor irritations already addressed. I have had a few quick rides and one loger ride through...
Would you believe Piaggio has a display full if Aprilias, Moto Guzzis, and Vespas? First time in 5 years. Surprise!
On the SXV main frame is it possible to unbolt and remove the upper steel tubing and separate it from the lower aluminum casting? I see the bolts but I wonder if there is also s...

6 days ago

Does anybody have a pair of passenger pegs they'd like to get rid of? Or have any custom made pegs from another brand that they've fashioned to work?

7 days ago

I'm starting to get a little seepage appearing on the right fork...has anyone else swapped in some fresh parts before? I'm still looking for the 'A' or 'K' indicator to know...

8 days ago

hello to all, sorry if i have missed part of the forum for this question, ...im really close to selling this bike after some 'research', im planning an overland trip from Euro...

10 days ago

As above I am almost about to pull the trigger here in the Uk on a 2007 Aprilia rxv550 freshly built by Paul cal Calvert aka cal550 i will be viewing this bike next week, i h...
Hi guys, I regrettably sold my 550 a couple of weeks ago to a young guy - he currently has a highly tuned sx 125 and wanted a 550 but hasn't passed his full test yet - who i...
Pulled the engine today for a valve check. What do y'all like to look at while the engine is on the bench? Mine has 3k miles/160 hours. Thinking I'll replace the plugs and oil p...
We were endurance racing over the weekend and had problems with the rear tyre not holding up. A local, reputable racer who was there helping us brought along his very expens...

12 days ago

Mate I just apologize I didn't stop and chat. I was so thirsty when I'd pulled into the fuel stop I just had to shoot across to be shop for a drink and didn't even get fuel. If...

14 days ago

Problem with motor oil in gearbox. Yesterday i go on test ride after engine is repair from mix oil and water. After 40 km riding i stop and bum oil from airbox flowing like wate...
hi all I'm looking to upgrade the sport city with a polini 198cc big bore kit and also a turbo but I'm yet to be ale to locate a turbo kit as such . i found a turbo which is ih...

16 days ago

Hi y'all, So I'm having this issue on my 2005 Sportcity 200: My old carburetor was leaking and I found a NOS carburetor on eBay and bought it. After installing it, the ...
So I love the large Aprilia logo on our bikes, but there's obviously a blank space where the side panels are. I noticed there are bikes with a decal set that completes the logo...
http://www.roadracingworld.com/news/...amic-winglets/ Interesting, we don't see them in WSBK. Gimmick or legit?
I was planning to lubricate the throttle cables today as it started sticking toward the end of my ride. I have a motion pro tool; however, upon removing the cables from the hous...

17 days ago

This article comes from AsphaltandRubber.com * * * The Aprilia Factory Works program has always been an impressive part of the Noale company’s lineup, offering the 250hp Ap...
https://www.asphaltandrubber.com/bik...orks-winglets/ *sigh* Italian style meets Bulgarian mid-70s bloc construction...
So I'm swapping my forged rims from my '13 RSV4 aprc abs (that have good slicks on them) with a set of '16 RSV4 OEM rims, and bringing the forged rims/slicks into the house and ...
I was wondering who lived in the So California area. I thought it might be fun to maybe get together for a weekend ride some time. Just a thought.

19 days ago

I went past the local shop and saw the latest (2017) 900cc twin Shiver & Dorsoduro the other day. Wow, what an example of bikes looking so much better than on the monitor. I'd...
Hi all, A while ago I purchased a genuine Aprilia tank bag off eBay and have never worked out how it fits. Pretty sure I am missing something, all I have is the bag, I'm thinki...

22 days ago

Hi I discovered today when replacing the original exhaust damage to the swingarm, it appears to have been caused by the end can hitting the rear of the swingarm, causing seve...
I bought a 05 aprilia rxv 550 a couple days ago and the starter has went out on it, I took it to a shop because I didn't know anything about aprilia motorbikes, the shop I took ...

23 days ago

My SC stalled on me 5 times in the last month - one time as I was pulling into an intersection...very scary as I almost got taken out by a car. The other times it was around tow...

24 days ago

Have had a 550 for 3 years, done 400 miles when I bought it, now done 1000 tops. It's never been the best at starting from cold (valve clearance possibly as they've never been d...

25 days ago

Hi can anybody help in telling me is the thread on the drive side of the crankshaft left hand or right hand,I know the ignition side is right hand but having problem with this s...
Very hard. And high seat height. When I sit on it, it barely compress. I can compress it by bouncing up and down, so it is not stuck. Not sure if I have stock, but is it suppose...

26 days ago

After 39 bikes I'm once again eagerly awaiting the arrival of my next Aprilia. My first was a Mk 2 silver and grey Tuono, and since then I've been through RSV1000's, RS125's an...
It was starting and idling fine up until last October when the rear decompressor gave out. At that time, a compression test showed 60 PSI front, 120 PSI rear. Since replacing it...

27 days ago

Hi does anyone know where the markings are to determine what colour of side bearings and Conrod shells are for standard size,when looking to order it give blue green and yellow ...
I have purchased a 2011 sxv550 and once I get it I plan to change all the fluids, but is there anything else I should be looking at? I know for sure it hasn't been insured for a...
Hi i have a problem with my Aprilia Scaraboe 200 Piaagio E2 engine The Bike runs for about 20 mins then it dies i wait about 20 mins then the bike starts again I have replaced...

28 days ago

Willing to pay $500 for a titled frame if anyone has one laying about from a parted out SXV or RXV. Just need the bare main frame that can be titled/registered. I can throw in t...

More than a month ago

Hey All - FINALLY I got off my ass and made the decision to buy a '17 RSV4RF. Traded in my '15 Ducati Diavel, which I've absolutely detested for longer than I should have. My ...
I'm really disappointed. I painstakingly applied the OEM Red and Green stripes on my 2017 RSV4 RR side saddle panels yesterday only to discover they are not sticking. Honestly...
Hey all, request help troubleshooting a new problem with my 2009 BV250ie. While on a short cruise on a cool day I experienced several episodes where in rapid succession: - th...
I have a scabby 150. Been tinkering on it a while. After fixing it and riding it around town I have determined I would like to get a little more pick up from it. I took off c...
My beast has just arrived. I picked up my Aprilia RXV 550 today. My springs put in and it has been all setup. I rode it around and all I can say so far is H**Y SH*T. It sucked o...
does anyone have a rekluse clutch to sell ? i have an 2008 year model 550 RXV. or does anyone know what Honda parts who fits ? please only answers who are 100% sure it...
At my last track day two weeks ago, I noticed a significant amount of noise coming from the right side of the engine wholly distinct from the exhaust noise. There was no leadin...
HI, new to this forum and forums in general, gen Z here lol. Just bought an Ape 2008 SXV 550, and she starts and runs just like making love to your high school sweetheart (th...
Anyone have a good experience with a shock service vendor in the US? The main shaft seal on my shock seems to be weeping a little - rather get it fixed now rather than fail d...
I have a 2017 rsv4 rr and would like to sit on another rsv4 with these approximate 1? risers as I?m considering these. Would prefer a 2016 or 2017 as these have a slightly diffe...
Hey guys, I've got a new oil filter rubber gasket that will fit a 350 BV part #855706 I also have 4 of these pesky rubber pads that go on the Givi Monokey/lock top case plate ...
1 2 3 4 5 6 7 Next >>   25 50 75
 

Last videos:

V Performance exhaust - Heard of it?
V Performance exhaust - Heard of it?
V Performance exhaust - Heard of it?
V Performance exhaust - Heard of it?
Greatest of all time...
Greatest of all time...
Cafe Racer CBR1000F - Video 2
Cafe Racer CBR1000F - Video 2
Irish riding vid
Irish riding vid
History/Walkaround video of my 74 Ironhead
History/Walkaround video of my 74 Ironhead
This is Fantastic - who'd a thunk it possible?
This is Fantastic - who'd a thunk it possible?
wisconsin vietnam memorial bike
wisconsin vietnam memorial bike

Tags

Cars ·
Travel ·
Pets ·
production-frontend
We use cookies for navigation analysis and personalized advertisement. By using our site, you agree to our use of cookies. Learn more